Ubee DVW326 Betriebsanweisung PDF herunterladen (Seite 11)

Ubee Interactive Understanding Specifications, Standards, and Firmware

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide • March 2014 7

1.6 Understanding Specifications, Standards, and Firmware

The following list provides the features and specifications of the DVW326.

Interfaces and Standards

 Cable: F-Connector, female

 LAN: 4 10/100/1000 Mbps RJ45 ports

 2 RJ-11 ports (telephony), PacketCable 1.5/2.0 compatible

 USB: 1 USB 2.0 host port

TEL 1

TEL 2

White On – Telephone is on-hook.

Off – Telephone is not provisioned.

Flashes – Telephone is off-hook.

Flashes – When a firmware upgrade is in progress, the DS/US and TEL 1 LEDs flash, first one

then the other for a few seconds. Then the DS/US and TEL 1 and TEL 2 LEDs flash in unison.

BATTERY White On – The battery is installed and AC power is on and properly functioning.

Off – If there is no AC power to the device, the BATTERY LED is Off, the POWER LED flashes,

and the TEL 1 LED is On. All other LEDs are Off.

Flashes – If the battery is at low power level (30 minutes left).

WPS

BUTTON

(top of

device)

White If not used, the LED is off. When a user pushes the WPS (WiFi Protected Setup) button or

triggers WPS via the device’s Web UI, an LED on the top-front of the device blinks for 4

minutes until a PIN is entered from the wireless client that wishes to connect (for example, a

laptop computer). After a WiFi client attaches successfully, the LED remains On for 5 minutes,

then turns Off.

REAR PANEL

LED

Color Description

ETH1

ETH2

ETH3

ETH4

Green/

Orange

On Green – An Ethernet device is connected to the device at 1000 Mbps speeds (Gigabit

Ethernet).

On Orange – An Ethernet device is connected to the device at 10/100 Mbps speeds.

Flashes (in Green or Orange) – When data is being passed between the cable modem and

the connected device.

The Ethernet ports are used to connect Ethernet devices such as

computers, gaming consoles, and/or routers/hubs to the DVW326 using

RJ-45 cables. Each Ethernet port on the back panel of the device has an

LED to indicate its status when an Ethernet device is connected.

FRONT PANEL

LED Color Description

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 118 119

Kommentare zu diesen Handbüchern

Keine Kommentare

Ubee DVW326 Betriebsanweisung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller Ubee DVW326